ANPR questions & answers

Answers for the systems around number-plate recognition.

Practical, vendor-neutral guidance for cameras, NVRs, VMS platforms, access control and metadata integrations.

These are general industry answers, not product support. Setting up ANPR Edge? Read the camera connection guide.

8 answersin barrier

Nedapbarrieraccess control

Why is my Nedap ANPR Lumo Wiegand output failing to open the barrier?

Check the Lumo's output mode, how plates map to credentials and the format the controller accepts. The ANPR Lumo has three Wiegand modes: Wiegand 26 sends a truncated value derived from a SHA-1 hash of the plate, Wiegand 64 encodes the characters, and Wiegand Matchlist sends an ID configured in the match list. A format mismatch is a common cause, but parity is not the only thing to check.

Nedap: ANPR Lumo Installation Guide v1.16 (sections 7.3.11 to 7.3.13)

ZKTecobarriercamera

Why is the ZKTeco LPR camera relay not opening a boom barrier?

When a ZKTeco camera detects a whitelisted plate but the boom barrier fails to open, the issue often lies in the wiring architecture. If you are integrating via Wiegand to a ZKTeco Security Relay Box (SRB) instead of direct GPIO wiring, you must ensure the camera is outputting an encrypted signal.

ZKTeco Security Relay Box Specifications

Hikvisioncamerabarrier

Why does a Hikvision allowlisted plate still fail to open the barrier?

Check the entry’s validity and its event linkage.

Hikvision H8 ANPR installation and configuration guide

Dahuacamerabarrier

Why does a Dahua access ANPR camera recognize an authorized vehicle but leave the barrier closed?

Check the barrier permission assigned to the vehicle or group.

Dahua Access ANPR Camera user manual

HanwhaVMSbarrier

Why does changing the camera’s relay pulse duration fail to keep an ANPR barrier open longer?

The ANPR application can override the camera setting.

Hanwha: Increase pulse time for barrier operation

UniFicamerabarrier

Why does UniFi recognize a plate but fail to unlock my gate?

Check the complete Protect-to-Access pairing and permission chain.

Ubiquiti: Configure License Plate Unlock

UniFicamerabarrier

Why can a UniFi plate unlock the gate again sooner than its cooldown suggests?

Another unlock method can reset the relevant cooldown behaviour.

Ubiquiti: Configure License Plate Unlock

Plate Recognizersoftwarebarrier

Why can an old Stream plate event arrive after the network recovers and reopen a barrier?

Queued webhooks may be delivered later.

Plate Recognizer Stream configuration

Most of these problems come from camera and NVR lock-in.ANPR Edge reads plates from the ordinary IP cameras you already own, on a PC at your site.Check out ANPR Edge

Didn’t find your question?

Type it below. We’ll search the existing answers first, and if none of them fit you can send it to us.